All Ironbark Drum Wraps have a thin clear protective film, Please remove AFTER installation is complete
There are two methods of installation
1 - Using the double sided tape on the overlapping seam
This method is not permanent and can be removed easily
2 - Contact Adhesive
This method is permanent and cannot be removed easily
If using this method you MUST use water based adhesive, some solvent based adhesive can damage the wrap
I will include a small off cut to test your adhesive with every order not requesting double sided tape
Place wrap around drum and get it straight, flush and square.
Hint:Place an old towel or blanket down to protect wrap.
Use spring loaded clamps to secure wrap in place.
When clamped in place adhesive can be applied.